Effect of Filler Metal on the Performance of 2205 Duplex Stainless Steel Weldments

Authors

MOHAMMED ABD EL -RAZAK AHMED KHADRAWY, Aliaa Abdelfatah, Mahmoud Ahmadein, Hanafy Hendawy, EZZAT Showaib

Abstract

The escalated concern in duplex stainless steels by industries is due to their best mechanical and corrosion resistance properties. In this work, the mechanical properties welding duplex stainless steel 2205 has studied. Joints were made using the GTAW process with different fillers: duplex ER 2209 and austenitic filler ER 312. There is a similarity in the microstructure which is obtained between with the duplex ER 2209 filler to the duplex 2205 base material, but the joints produced with the austenitic fillers cause a increase of the ferrite(δ) to austenite(γ) phase ratio. In order to evaluate the influence of the fillers on the weld, the mechanical properties by impact , tensile test and the hardness test. The phase imbalance produced for the different fillers causes variation of the mechanical properties. Without getting any detrimental changes in the mechanical properties, by using different filler metals, has addressed in this work .while, ER 312 had the advantage in hardness , tensile, impact test and ferrite percent.

Recommended Citation

ABD EL -RAZAK AHMED KHADRAWY, Aliaa Abdelfatah, Mahmoud Ahmadein, Hanafy Hendawy, EZZAT Showaib, MOHAMMED (2021) "Effect of Filler Metal on the Performance of 2205 Duplex Stainless Steel Weldments," Journal of Engineering Research: Vol. 5: Iss. 4, Article 8.
Available at: https://digitalcommons.aaru.edu.jo/erjeng/vol5/iss4/8